Note: Wallshark is for use on drywall or sheetrock repairs. Do not use for repairs of brick, tile, lath, plaster, or plasterboard walls. If you find a stud within 1 inch of your bracket center point, you will need to chisel a ½ portion of the stud away. Further, do not use if a stud or other solid surface is present below drywall at the bracket center point. Wallshark is approximately 1.8 inches wide when installed. Make sure your cover post will completely cover Wallshark’s dimensions.
SINGLE MOUNT PLUG
Snaps in place for using a single center mount only. Once inserted it cannot be removed.
Attaches to your drill. Slides onto center of the WallShark parts to peform the repair.
8 screws are included. Only use the supplied screws to avoid damage and for best results.
Threaded plug with rotating internal screw boss array for attaching bracket.
Cuts through drywall and stops when the cut is complete creating a hole for the wall plug.
Removes layers of paint and drywall texture to help the wall plug lay flush to the surface.
Guides your drill to keep the WallShark perpendicular & straight during installation.